Operating Modes And Features - Audiovox GMRS862 Owner's Manual

Operating Modes and Features

GRMS/FRS Operation:
- Press and hold the Power On/Off button for 2 seconds to turn on
power.
- Press the MODE button so the Channel number flashes.
- Select the desired channel with the Up (10) and Down (11) Buttons.
When receiving a call, the
call.
- Press and hold the PTT button (4) to transmit, then speak into the
microphone clearly and slowly. The Transmit icon (
on the display while the button is pressed.
- Release PTT Button (4) to receive.
- Communication can only be accomplished when the channel and
CTCSS tone frequency of at least two parties are the same.
- The CTCSS subcode (01-38) will be displayed on the LCD panel if the
CTCSS tone frequency function is enabled (not oF).
Channel Selection
In order to communicate with other GMRS/FRS units, both the transmit-
ting and receiving party must be on the same frequency.
The GMRS862 has 22 channels (frequencies) indicated by the large digits
on the LCD display panel. Channels 1 through 7 are the shared GMRS/
FRS channels. Channels 8-14 are FRS only channels, while channels 15-
22 are assigned GMRS only channels. If an FRS only channel (8-14) has
been selected, the HI or LO icon will not be displayed on the LCD panel;
otherwise, for channels 1-7 (GMRS/FRS) and 15-22 (GMRS only) the HI or
LO icon will be displayed. Communication with Audiovox GMRS/FRS and
compatible units is possible on these 22 channels. Before transmitting on
the selected channel, press the Monitor (M) Button (2) to check the activity
on that channel. If there is activity on the selected channel, change to
icon appears to indicate an incoming
13
128-7625
) appears
13 of 28