Operating Modes And Features - Audiovox GMRS1262CH Owner's Manual

Down Channel/Volume Button (11)
In the standby mode, pressing this button will decrease the listening
volume. When in function edit mode this button will be used to adjust the
unit's settings.
Mode/WB Button (12)
This button is used to select the various feature settings in the GMRS/FRS
or Weather band modes. Holding the MODE/WB button longer than 2
seconds will toggle between the GMRS/FRS and Weather band modes.
External Microphone (MIC)/Speaker (SPK)/(CHG) Jack (6)
This jack accepts the supplied Audiovox Earbud/microphone connector, or
the Charging Adapter. For the equipment and accessories supplied with
the GMRS1262CH, refer to Page 7 and/or visit the Audiovox web site at
www.audiovox.com.
Scan/VOX Button (14)
Press this Button momentarily to enable or disable the scan mode. Press
and hold the button for more than 2 seconds to enable or disable the VOX
mode; the VOX icon will appear in the bottom right corner of the display
when enabled.

Operating Modes and Features

GMRS Operation:
- From GMRS/FRS standby mode, press the (
seconds to turn on power.
- Press the MODE button so the Channel number flashes.
- Select the desired channel with the Up (10) and Down (11) Buttons.
When receiving a call, the BUSY icon appears to indicate the incom-
ing signal.
- Press and hold the PTT button (4) to transmit, then speak into the
microphone clearly and slowly. The Transmit Signal Level indicator
( ) will display the relative strength of the transmitted
signal.
- Release PTT Button (4) to receive.
) button for about 2
12
128-7624
12 of 28