Honeywell evohome Security User Manual page 5

CONTROLLING YOUR SYSTEM
How to use the tag reader
The security system can be set in two different arming modes:
• Total arm / total set: this mode is used when you leave your premises.
• Partial arm / partial set: this mode is used when you want to use your system while in your home
(at night for example). Only all sensors that you have set to "Partial mode" in your TCC security web
account)
As well as arming the tag reader can also be used to initiate a silent SOS/panic (personal attack) alert.
To arm the system when you leave your premises: Total arm
1.
2.
3.
4.
To arm the system when you are still in your premises: Partial arm
1.
2.
3.
Press this button.
Present your tag in front of this area on the tag reader.
The green light flashes during the 30 second exit delay.
Exit the premises before the end of the beeps. The beeps will begin slow
and increase faster near the end of the exit delay period).
Press this button.
Present your tag in front of this area on the tag reader.
The green light flashes during the 30 second exit delayand
remains flashing. There are no beeps produced.
5