ResMed AirMini Patient Manual page 7

Checking mask fit
1. Fit your mask as described in the mask user guide.
2. Tap Sleep in the Navigation drawer.
The Sleep screen opens.
3. Tap Mask Fit
The Mask Fit screen opens.
4. In the Mask Fit screen, tap START Mask Fit.
The machine starts blowing air.
5. Adjust the mask, mask cushion and headgear until you get a Good mask seal result.
6. To stop mask fit, tap STOP Mask Fit.
If you are unable to get a good mask seal, talk to your provider.
Starting therapy using the app
1. Make sure that your machine is set up correctly and powered on.
2. Confirm that your Bluetooth connection is active.
Refer to Connecting your machine and smart device for instructions.
3. Fit your mask.
4. Tap Sleep in the Navigation drawer.
The Sleep screen opens.
5. Tap Therapy
The Therapy screen opens.
6. If SmartStart™ is turned on, fit your mask and begin to breathe normally to start therapy.
Otherwise, tap START
Stopping therapy using the app
If SmartStop is turned on, remove your mask and therapy will stop automatically. Otherwise, tap
STOP .
Changing comfort features
Your AirMini machine has been set up for your needs by your provider, but you may find that you
want to make small adjustments to make your therapy more comfortable. The comfort features Ramp
Time, Pressure Relief, SmartStart and SmartStop can be adjusted on the Sleep options screen.
Note: Pressure Relief must first be enabled by your provider.
6
.
.
to start therapy.