ZyXEL Communications Prestige 610 Quick Start Manual page 7

Hide thumbs Also See for Prestige 610:

PROBLEM

I cannot

This problem may only occur in Windows 2000 computers. This

configure

happens if you did not remove the Prestige physically from the

computer after uninstalling the driver or if you did not install the driver

properly. Do one of the following:

Ethernet

adapter.

Refer to the User's Guide for detailed information.

•

Uninstall the driver but DO NOT restart the computer when

prompted. Shut down the computer from the Start menu and

remove the Prestige physically from the computer.

•

Uninstall the Prestige driver manually in the Device Manager

screen if you do not wish to remove the Prestige physically

from the computer.

•

Follow the steps in this Quick Installation Guide to install the

driver after you installed the Prestige in the computer.

You can still use the Ethernet adapter to connect

CORRECTIVE ACTION

to the network.

Table of Contents