ZyXEL Communications Prestige 610 Quick Start Manual page 5

Hide thumbs Also See for Prestige 610:

For Windows 2000/XP

1. Click My Computer, Control Panel, Network and Dial-up

Connections (Windows 2000) or Network Connections (Windows XP).

2. Right-click the icon for the Prestige and click Properties.

3. In the General tab, select Internet Protocol (TCP/IP) and then click

Properties.

4. If your ISP does not give you an IP address, select Obtain your IP

address automatically and Obtain your DNS IP address

automatically.

If your ISP gives you a static (or fixed) IP address, select Use the

following IP Address and enter the IP address, subnet mask and default

gateway. If given, enter the DNS IP address.

Then click OK.

5. Close the Local Area Connection Properties window and restart the

computer when prompted.

WAN – Configuring a Dial-Up Connection

For Windows 98/98 SE/Me

1. Click My Computer, Dial-Up Networking, right-click the icon for

Prestige and click Properties.

2. Click the Server Types (Windows 98/98 SE) or Networking (Windows

Me) tab and select TCP/IP.

3. Check your TCP/IP settings and click OK to return to the Dial-up

Networking window.

4. Double-click the icon for the Prestige.

5. Enter only the user name and password provided by your ISP and click

Connect.

For Windows 2000/XP

1. Click My Computer, Control Panel, Network and Dial-up

Connections (Windows 2000) or Network Connections (Windows XP).

2. Right-click the icon for the Prestige and click Properties.

3. In the Networking tab, select Internet Protocol (TCP/IP) and click

Properties.

4. Check your TCP/IP settings and click OK to go back to the Network and

Dial-up Connections (Windows 2000) or Network Connections

(Windows XP) window.

Table of Contents