Vax Ultra Pro Powerhead VX59 Let's Get Started page 3

Cyclonic barrel vacuum
Table of Contents

Advertisement

• Only Vax recommend tools and accessories should be used with this vacuum cleaner
• Vax recommends the use of a Residual Current Device rating of 30 mA or less.
• If the supply cord is damaged, it must be replaced by the manufacturer, or
similarly qualified person in order to avoid a hazard, or invalidating the warranty.
• CAUTION: The hose contains electrical connections:
– Do not use to suck up water
– Do not immerse in water for cleaning
– The hose should be checked regularly and must not be used if damaged
• IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the
unit should overheat, the thermostat will automatically turn the unit off. Should
this occur, unplug the vacuum cleaner from the electrical outlet and turn off the
switch. Remove dirt container and empty. Clean filters. Allow the unit to cool for
approximately one (1) hour. To re-start, plug into an electrical outlet and switch
back on.
• Don't attempt to remove blockages with sharp objects as this may cause damage
to the vacuum cleaner.
• Do not vacuum hard or sharp objects such as glass, nails, screws or coins etc.
• Do not vacuum plaster dust, concrete dust or any other building
or vitreous material.
• Do not vacuum flour, baking soda or any other powder-based carpet refresher
or deodoriser.
• Don't use this vacuum cleaner if it has been dropped, damaged or left outdoors.
• Don't vacuum up any flammable or combustible materials (lighter fluid, petrol,
kerosene etc.) or use the vacuum cleaner in an area with explosive vapours or liquid.
• Use only SAA approved 10amp extension cords. Care should be taken to arrange
the extension cord as it can be a trip hazard.
• Always carry the vacuum cleaner by the handle.
• Store your vacuum cleaner in a cool, dry area.
• Always keep the power cord away from the brushes whilst using your
vacuum cleaner.
PLEASE KEEP INSTRUCTIONS FOR FURTHER USE.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents