Troubleshooting - Philips Expanium EXP 301/01 User Manual

Troubleshooting

WARNING
Under no circumstances should you try to repair the set yourself as
this will invalidate the guarantee.
If a fault occurs, first check the points listed, before taking the set for
repair. If you are unable to solve a problem by following these hints,
consult your dealer or service centre.
Problem
No power, playback
does not start
HoLd indication
and/or no reaction
to controls
No sound or
bad sound quality
no cd indication
nF dISC indication
26
Solution
– Insert the batteries correctly.
– Replace the batteries.
– Connect the mains adapter securely.
– Deactivate HOLD.
– Disconnect the set from the power supply
or take out the batteries for a few seconds.
– Press 2; to resume playback.
– Adjust the volume.
– Check and clean the connections.
– Keep this set away from active mobile
phones or strong magnetic fields.
– Insert a disc, label upwards.
– Clean or replace the disc.
– Wait until the steamed up lens has cleared.
– Make sure the inserted CDR(W) is
finalized.