Updating The Camera Firmware; Updating The Firmware - Panasonic AU-V35LT1G Operating Instructions Manual

Updating the camera firmware

Updating the firmware

To update the firmware, an SD memory card is required.
Use the camera or P2 Viewer Plus to format the SD memory card.
1
Download the firmware from the website.
http://pro-av.panasonic.net/
2
Save the downloaded firmware to an SD memory card.
3
Insert the SD memory card with the firmware into the sub slot.
4
Turn the power on.
5
Press the <INFO> button to display the INFO screen. (Fig. 1)
6
Select [VERSION].
7
Press the jog dial button.
8
When [UPDATE] appears, select [UPDATE] → [OK].
This starts the firmware update. Do not turn the power off until the update is completed.
@ NOTE
t The time required for update is approximately 30 minutes. It is necessary to supply power without
interruption during the update. Use the external DC power supply instead of battery.
t Do not remove the SD memory card during the update (while the card access LED is flashing). The
communication with the camera may be discontinued, which may cause malfunction to the camera.
t Update is possible even if the card slot cover is opened.
t Even if [REC IMPOSSIBLE] error is displayed, update is possible when the firmware is saved in the
specified folder of the SD memory card.
Updating the camera firmware
Fig. 1
29