Right Side - Panasonic AU-V35LT1G Operating Instructions Manual

Right side

1
2
3
4
5
6
7
8
9
1 Accessory mounting holes
For attaching accessories.
f Mounting hole size
- 3/8-16 UNC
2 <CONTROL PANEL> terminal
A terminal to connect the control panel.
3 <SDI OUT1>/<SDI OUT2> terminal
Output terminals of 3G/HD SDI for video monitor.
For the cable to connect to this terminal, prepare a double-shielded cable equivalent to 5C-FB.
4 Power supply output terminal for lighting
Power supply terminal when light is connected.
5 <GENLOCK IN> terminal
Inputs reference signals when setting the genlock on the camera unit or when externally locking the
time code. The input signal is 3G/HD-SDI.
For the cable to connect to this terminal, prepare a double-shielded cable equivalent to 5C-FB.
6 <TC IN/OUT> terminal
Connects to the time code input terminal of the external device when locking the time code of the
external device to the time code on the camera.
Inputs the standard time code when locking with the time code of the external device.
For the cable to connect to this terminal, prepare a double-shielded cable equivalent to 5C-FB.
7 Fan outlet
Fan outlet for dissipating heat. Do not block this when the camera is in use.
8 <LAN> terminal
For connecting a LAN (100BASE-TX) cable.
Use the shielded cross cable for the cable to connect to this terminal.
9 <USB DEVICE> terminal
USB device terminal for connecting a USB 2.0 cable.
For the cable to connect to this terminal, prepare a double-shielded cable.
10
10 11
Description of Parts
12
13
14
15
16
21