Panasonic AU-V35LT1G Operating Instructions Manual page 20

Description of Parts
10 Fan inlet
Fan inlet for dissipating heat. Do not block this when the camera is in use.
11 <TOGGLE/WB> switch
[WB]/[EI]/[SHUTTER] can be assigned.
[WB] is assigned as the factory setting.
Press and hold upward to operate the automatic white balance.
12 Power switch
Used to switch the power to on <l> or to standby <
The camera is not completely disconnected from the main power even when the power switch is set to
the < > position.
13 <LOCK> switch
Disables the operation of the buttons and switches at the left side of the camera.
Sets the button and switch to disable the operation in [MENU] → [SYSTEM SETTINGS] → [SIDE
LOCK].
Keep this in the < > position to prevent incorrect operation when moving the camera, etc.
14 Card slot access LED
Displays the access status of recording and playback of the card inserted in the main slot and the sub
slot.
Top: Main slot
Bottom: Sub slot
The access status of the file operation is also displayed for the sub slot.
15 <PHONES> terminal
Connecting terminal of headphones for audio monitor. (Stereo mini jack)
16 Speaker
EE audio can be monitored during recording while playback audio can be monitored during playback.
The alarm is output in sync with flashing/lighting of the warning indicator.
Audio from the speaker automatically is turned off when headphones are connected to the <PHONES>
terminal.
17 Card slot open/close switch
Opens the card slot cover.
18 Sub slot
Slot for SD memory cards (optional).
19 Main slot
Slot for P2 card.
20
>.