Accessories - DANPHONE Futronic MKII User Manual

ACCESSORIES

The test box comes with the following standard accessories:
1 pcs Power adapter 100-240 VAC / 13,2 VDC
1 - Cable for external DC power
incl. Cigar lighter plug
1 - USB cable for connection to PC
1 - Coax cable, 25 cm, with BNC
2 - Coax cable, 150 cm, with BNC
1 - Coax cable, 500 cm, with BNC
1 - AIS signal combiner / dummy load
1 - Audio Reference / AF Generator
1 - Telescopic antenna for VHF/AIS
1 - Wire antenna for MF/HF/NAVTEX
2 - UHF plug to BNC socket adapter
1 - UHF socket to BNC socket adapter
1 - BNC socket to BNC socket adapter
1 - User's Manual in English
1 - Calibration Certificate
The following accessories are available as an option:
RF Amplifier
If the test box signal is not powerful enough when testing NAVTEX receivers and MF radios
over the air, adding this RF amplifier will increase the output level by 15-20 dB.
Watertight and Crush Proof Case
This case is specially configured to hold the tester and accessories safe and secure. Weight
only 3.9 kgs. External dimensions: 460 x 360 x 175 mm.
Set of Attenuators
Attenuators are used e.g. with AIS tests and VHF sensitivity tests. The set includes 1x10 dB,
1x20 dB and 1x40 dB attenuators with BNC.
Pilot Plug Cable
This cable is used with the testing of pilot plugs onboard ships. The cable is equipped with a
jack to fit standard pilot plugs.
7