Table of Contents
Advertisement
Alternatively, use this setup:
Examples of Printout from the Memory:
AIS # 1, Time/date: 13:01:57 / 22-11-2011
Message ID: 1 MMSI: 219557624
Position: 57d12.3781 N
COG: 351.4d SOG: 0.0 Knots ROT: No info True Heading: No info
AIS1 Freq.: 161,975.3 kHz Fwd.: 11.4 Watt Rev.: 0.2 Watt VSWR: 1.30
AIS # 1, Time/date: 13:02:27 / 22-11-2011
Message ID: 1 MMSI: 219557624
Position: 57d12.3922 N
COG: 351.4d
SOG: 0.0 Knots ROT: No info True Heading: No info
AIS2 Freq.: 162,025.3 kHz Fwd.: 11.5 Watt Rev.: 0.2 Watt VSWR: 1.30
AIS # 1 Time/date: 13:02:55 / 22-11-2011
VTS DATA: CH70-156.525 MHz RX MMSI: 9999999990 Format 120 Cat.: 103
TX MMSI: 2195576240
Position: 57d12.3935' N 009d40.6808' E Time: 12:02:55
EOS: 122 ECC: 80 Status: OK
Freq.: 156,525.3 kHz Fwd.: 12.0 Watt Rev.: 0.2 Watt VSWR: 1.29
Receive AIS
In the Receive AIS mode, the test box will receive the MMSI number, AIS data and frequency of
the first transponder being detected by the test box.
Use this setup:
SIGNAL
COMBINER
20 dB
Attenuator
9d40.6785 E
9d40.6806 E
Retracted antenna
20 dB Attenuator
26
AIS TRANSPONDER
ANT
AIS TRANSPONDER
ANT.
Advertisement
Table of Contents
