Test Results; Show Results; Transfer To Pc; Clear Memory - DANPHONE Futronic MKII User Manual

Maritime communications test box

Hide thumbs Also See for Futronic MKII:

Table of Contents

TEST RESULTS

Test results are automatically stored in the test box memory with the facility of transferring them

to a PC or printer. The test result memory can contain a total of 600 measurements. If more

measurements are done, the oldest will be deleted.

Test results can be retrieved from the memory and viewed on the display. Select Show results

and press OK. Every test recorded is organized with a header under which the various test

results are displayed line by line. Press ↓ and ↑ to toggle between the lines.

Test results can be transferred to your PC via the free PC software program TEST BOX

MANAGER that is available for download from Danphone's website. See page 41.

Alternatively, any serial software set for 38,400 Baud N81 (No parity 8 data bit and 1 stop bit)

should be able to receive the data and test results from the test box.

Here is how to use a HyperTerminal program within Windows. Usually the program can be

found on your PC under Start/Accessories/Communications. If not, we advise you to download

a HyperTerminal program from the Internet.

1) Connect your test box to the PC, using the USB cable supplied with the test box.

2) Create a HyperTerminal connection on your PC; select COM port and do the following

settings:

Bits per second = 38,400

Data bit = 8

Parity = None

Stop bit = 1

Flow control = Hardware

Press OK, and the PC is now ready to receive data from your test box

3) On your test box, select Transfer to PC and press OK.

4) Press Sele, and you may select each individual test result you wish to transfer. The latest

result is displayed first – or press All, and all test results in the memory will be transferred

This will clear all test results store in the test box memory.

USB Cable

Table of Contents