Table of Contents
Advertisement
2. PC-controlled EPIRB tests
In addition to generating test reports from EPIRB tests stored in the memory, this window also
enables you to perform PC-controlled EPIRB tests generating test reports automatically. With
this, the system will not transfer the test results to the test box, but still generate finished test
reports that can be stored in your PC.
1) Turn the test box on. No need to select EPIRB tests, your PC will take control.
2) Deselect all tests from the header list at the right hand side, if any.
3) Select frequency in the EPIRB dialogue box at the left hand side
and fill in the beacon information form.
4) Press "Start PC-controlled Test" and then activate the EPIRB.
5) Wait for the EPIRB Test Report to be automatically generated (HTML format).
See example of an EPIRB Test report on the previous page.
48
Advertisement
Table of Contents
