Comand - Mercedes-Benz S-Class Owner's Manual

Operating systems
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话18218750259
COMAND seats
COMAND seats
Lumbar support
i
The components and operating principles of
COMAND can be found on ( page 71).
The lumbar support in the backrest of the
front seats can be adjusted to provide op-
timum support for your back.
Press the O button.
The main area of the COMAND display
is active. A scale appears.
P82.86-5022-31
To adjust the lumbar support: slide
omp ymz
or turn
ting is reached.
To confirm the selection: press n.
To move to the lower menu item:
qmr .
slide
198
To select the seat: slide
ymz.
To confirm the selection: press n.
i
When you press the
the previously set seat is active.
Multi-contour seat*
i
The components and operating principles of
COMAND can be found on ( page 71).
The contour of the front seat backrests
can be individually adjusted to provide
optimum support for your back. This is
achieved by controlling the pressure in the
air chambers in the multi-contour seat.
The adjustments are made using the
COMAND display.
i
When you adjust the multi-contour seat, you
may hear the air being pumped in or released.
You can adjust the following air cushions:
Seat cushion side bolsters
Thigh support cushion
Backrest side cushions
until the desired set-
Backrest curvature in the lumbar
region
Backrest curvature in the upper back
region
Nur fuer internen Gebrauch
omp
or turn Seat firmness
Make sure that the key is in position 2
in the ignition lock.
O
Press the O button.
function button,
Selecting the seat
You must first select the seat for which you
wish to make adjustments.
Press the O button.
The main area is active.
To move to the lower menu item:
slide qmr.
P82.86-5023-31