Tightening Torque Settings - APRILIA STRADA 660 Service Manual

ENGINE
3.2.6.

TIGHTENING TORQUE SETTINGS

DESCRIPTION
Oil seal plate screws
Threaded pin
Clutch casing and Flywheel casing screws
Bearing plate and oil filter screws
Oil inlet hose screw
Oil Drain screw
Chain sprocket nut
Neutral light switch screws
Oil pump screws
Oil pump gear cover screws
Counter shaft nut
Engine sprocket nut
Drum nut
Clutch screws
Clutch cover plate screws 1
Clutch cover screws 1 and 2
Water pump and water pump union screw
Speed sensor and oil filter cover screws
Oil filter bleed screw
Cylinder screws
Cylinder side screws
Head screws
Cylinder-head upside-down screws
Head side screws
Timing gearwheel screws
Water hose union screws
Chain guide screw 1
Freewheel-rotor screws
Chain tensioner body screws
Chain tensioner screw
Flywheel nut
Stator cables plate screw
PK screws
Stator screws
Flywheel cover screws
Oil outlet hose screws
Starter motor screws
E/S gears cover screws
3 - 20
ENGINE
0.8 - 1.2 Sealant Threebond TB 1215 on thread
2.0 - 2.4 Loctite 620 on thread
0.8 - 1.2
0.8 - 1.2 Loctite 620 on thread
0.8 - 1.2 Loctite 620 on thread
2.7 - 3.3
11.0 - 13.0 Engine oil 10W-40 on thread
0.2 - 0.6 Loctite 620 on thread
0.8 - 1.2
0.35 - 0.45 Loctite 620 on thread
6.0 - 8.0 Engine oil 10W-40 on thread
7.0 - 9.0 Molykote G-n plus grease on thread
8.0 - 10.0 Engine oil 10W-40 on thread
0.8 - 1.0 Engine oil 10W-40 on thread
0.8 - 1.2 Loctite 620 on thread
0.8 - 1.2
0.8 - 1.2
0.8 - 1.2
0.3 - 0.7
4.8 - 5.2 Engine oil 10W-40 on thread, head and washer
0.8 - 1.2
4.8 - 5.2 Engine oil 10W-40 on thread, head and washer
3.5 - 3.9 Engine oil 10W-40 on thread, head and washer
0.8 - 1.2
1.8 - 2.2
0.8 - 1.2
0.6 - 1.0
2.7 - 3.3 Loctite 620 on thread
0.8 - 1.2
1.8 - 2.2
7.0 - 9.0 Engine oil 10W-40 on thread
0.8 - 1.2 Loctite 620 on thread
0.6 - 0.8 Loctite 620 on thread
0.8 - 1.2 Loctite 620 on thread
0.8 - 1.2
0.8 - 1.2 Sealant Threebond TB 1215 on thread
0.8 - 1.0
0.8 - 1.2
MY 660