LG U310 Service Manual page 155

9. Calibration & RF Auto Test Program
9.1.2 Setup file (Info_Db.txt)
/*cal*/[Default]=[U310]
1 2 3
/*cal*/[U310]=[..\\Cal_Model\\U310\\LG_RfCal_QuU310Ag_099.dll]
/*auto*/[U310]=[..\\RF Auto\\Rf_AutoMain_Ver1114.dll]
4
[ezlooks]=[off]
[batcal]=[off]
[svc]=[off]
[standalone]=[off]
[tescom]=[off]
5
[process]=[cal]
6 7
[U310]=[..\\Auto_Model\\U310\\Procedure_U310_102.xml,..\\Auto_Model\\U310\\Spec_U310_101.
xml,..\\Auto_Model\\U310\\AutoSetup_100.xml]
1: Indication of 'cal process' or 'auto process'
2: Model name which is displayed on Hot Kimchi program
3: Relative path of Main Sequence dll file from Hot_KimchiD.exe
4: You can change this as 'on' or 'off'(should be in lower case; on, off)
5: You can change this as 'auto' or 'cal'(should be in lower case; on, off)
6: Auto model name
7: Relative path of auto model procedure, spec, setting file from Hot_KimchiD.exe
'on' or 'off'. (use only lower case)
'auto' or 'cal'. (use only lower case)
- 156 -