Toyota Hilux Owner's Manual page 322

320
5-10. Bluetooth
■
While driving
The function "By dial pad" is unavailable.
■
Release tones
●
A continuous tone signal is a character string that consists of numbers and
the characters "p" or "w". (e.g.056133w0123p#1∗)
●
When the "p" pause tone is used, the tone data up until the next pause tone
will be automatically sent after 2 seconds have elapsed. When the "w"
pause tone is used, the tone data up until the next pause tone will be auto-
matically sent after a user operation is performed.
●
Release tones can be used when automated operation of a telephone
based service such as an answering machine or bank telephone service is
desired. A telephone number with continuous tone signals can be registered
in the contact list.
●
Tone data after a "w" pause tone can be operated on voice command during
a call.
■
Transferring calls
●
It is not possible to transfer from hands-free to the cellular phone while driv-
ing.
●
If you transfer from the cellular phone to hands-free, the hands-free screen
will be displayed, and you can operate the system using the screen.
●
Changing between cellular phone call and hands-free call can be performed
by operating the cellular phone directly.
●
Transfer method and operation may vary according to the cellular phone
used.
●
For operation of the cellular phone in use, see the telephone's manual.
■
Transmit volume setting
●
The sound quality of the voice heard from the other party's speaker may be
negatively impacted.
●
"Transmit volume" is dimmed when mute is on.
■
Call waiting operation
Call waiting operation may differ depending on your telephone company and
cellular phone.
®
Phone