274
5-5. Using the radio
Setting station presets
Up to 6 preset stations can be registered in AM mode and up to 12
preset stations can be registered for FM radio mode.
Tune in the desired station.
1
Select one of the screen buttons (1-12) and hold it until a beep is
2
heard. (Up to 6 preset stations can be registered in AM mode and
up to 12 preset stations can be registered for FM radio mode.)
● This sets the frequency to the screen button.
● The station's frequency will be displayed in the screen button.
● To change the preset station to a different one, follow the same
procedure.
RDS (Radio Data System)
Depending on the availability of RDS infrastructure, the service may
not function properly.
■
Reception sensitivity
●
Maintaining perfect radio reception at all times is difficult due to the continu-
ally changing position of the antenna, differences in signal strength and sur-
rounding objects, such as trains, transmitters, etc.
●
Short pole type antenna:
The radio antenna is mounted on the roof. The antenna can be removed
from the base by turning it.
●
The radio automatically changes to stereo reception when a stereo broad-
cast is received.
●
If the signal becomes weak, the radio reduces the amount of channel sepa-
ration to prevent the weak signal from creating noise. If the signal becomes
extremely weak, the radio switches from stereo to mono reception.
NOTICE
■
To prevent damage
Remove the antenna in the following cases.
●
The antenna will touch the ceiling of a garage.
●
A cover will be put on the roof.
●
When driving through an automatic car wash.
●
Any other cases where there is a risk of touching surrounding parts.