AEMC GROUNDFLEX 6474 User Manual page 13

Hide thumbs Also See for GROUNDFLEX 6474:

Table of Contents

NOTE: • The sensors have arrows to indicate a direction.

• All sensors should face the same direction.

• All sensors should have the same number of wraps.

• Sensors should encircle both leg AND ground system.

3. On the Model 6474, set the INPUT selection switch accordingly. You can mea-

sure the current flowing through one GroundFlex

through several sensors (1, 2 or 1, 2, 3), or through all of the sensors (1, 2, 3,

4).

4. Select how many times the sensor is wrapped around the conductor to be

measured (from 1 to 4 turns) using the SENSOR TURNS selection switch.

NOTE: To increase measurement sensitivity, we recommend when possible,

wrapping a maximum number of turns (up to 4) around the structure.

Set the SENSITIVITY switch to the desired sensitivity: x1/10, x1, or x10. The

choice of sensitivity depends on the expected current value. As a precaution,

always start with the lowest sensitivity, x1/10, and increase it as needed.

GroundFlex

Adapter Model 6474

Shop for AEMC products online at:

(clockwise or counter-clockwise around the tower legs)

To the Model 6472

ShopAEMC

www.

6474

sensor (1, 2, 3, or 4), or

.com

1.877.766.5412

Table of Contents