Preface - Sun Microsystems Sun StorEdge T3 Installation, Operation And Service Manual

Preface

This manual contains information on how to install, operate, and service the Sun
StorEdge™ T3 and T3+ arrays. Most of the procedures in this manual can be
performed by an experienced system administrator.
Before You Read This Book
Read the safety information in the Sun StorEdge T3 and T3+ Array Regulatory and
Safety Compliance Manual that is included with the array before attempting the
installation. Make sure you have prepared for the installation by reviewing the Sun
StorEdge T3 and T3+ Array Site Preparation Guide and the Sun StorEdge T3 and T3+
Array Configuration Guide. These guides are available on the Sun™ documentation
web site or from your Sun representative.
Work with your Sun representative to determine if you require any external
hardware or software products for using this device. Being prepared with this
knowledge and the appropriate tools will simplify the installation.
How This Book Is Organized
This manual is organized as follows:
Chapter 1 provides an overview of the Sun StorEdge T3 and T3+ arrays, describing
features, components, architecture, and supported configurations.
Chapter 2 describes how to install the array in either a single-unit or partner-group
configuration.
xi