Adjustment Of Option Stop Position - SATO LC400e Series Operator's Manual

Section 8: Appendix
8.4 BASE REFERENCE POINT ADJUSTMENT (Cont'd)

8.4.2 Adjustment of Option Stop Position

Adjust OFFSET potentiometer on operator panel:
Option stop position (such as cutter, dispenser and tear-off) is adjustable within the range of +3.75 mm to
-3.75 mm (+0.15" to -0.15") using the potentiometer adjustment described above.
Note
The above cutting position indicates the stop position when label pitch sensor is set to Gap sensor.
Tear off and dispensing positions are adjustable in the same manner.
Page 8-6
Label feed direction
Adjustment for
"+" value
No
Adjustment
Adjustment for
"-" value
+3.75 mm (+0.15")
±3.75 mm (0.15") for all media
Base reference
point for printing
Cut position
(Print head)
-3.75 mm (-0.15")
LC400e Series Operator Manual