Cavius 2104-001 User Manual page 22

When the test signal is sent out, the alarms will respond in two ways:
1. A single beep every 8 seconds indicates that the alarms are connected
and functioning.
2. Three short beeps every 8 seconds indicates a smoke sensor fault.
The alarm should be cleaned by running the vacuum (on a low setting)
around the smoke alarm chamber and tested again.
Once the alarms have indicated they are interconnected; the beeps can be
stopped on each alarm with a short press of the test button.
TIP: It is safe to cover the sound output hole with your finger during the
testing to minimise the sound level emitted.
If any problems occur during testing, visit www.cavius.co.nz or
www.cavius.com.au for further trouble shooting.
19