Fig. 3: Use of rubber test lead holster
With this rubber holster its possible to have a very
practical use of instrument, executing measures with test
leads and at the same time see value at display of
instrument.
4. MEASUREMENT
4.1. 4-1. NOTES
1. Check if the batteries are installed properly.
2. Check if the LCD and the range indicator show the
same as the function desired.
3. When changing range, firstly remove the tested
conductor or electrical circuit from the clamp jaw in
order to avoid and accident.
4. Strong vibrations and impacts, may cause damage
to the instrument.
EN-7
TM-1012