Table of Contents
Advertisement
breakage, deformation, fracture, foreign substance,
No display, etc., do not conduct any measuring.
5. Do not contact any exposed metal (conductive) parts,
such as end of test lead, jack, fixing object, circuit
etc,.
6. Keep you insulated from the object waiting
measuring.
7. Do not operate the meter under the environment with
explosive
combustible gas(material) steam or filled with
dust.
8. In order to avoid reading incorrect data, you have to
replace the batteries immediately when the symbol "
" appears on the LCD.
9. In
order
contamination and static electricity, do not touch the
circuit board before you take any adequate action.
7. MAINTENANCE NOTES
If the symbol " " appears on the LCD, please
replace the battery immediately.
1. Remove all test leads and the conductor under test
before performing of battery replacement.
2. Set the range to OFF position.
3. Remove the screws from the battery cover with
screwdriver, and detach the battery cover from the
bottom cover.
to
avoid
EN-15
gas
(material),
the
damage
CAUTION
TM-1012
for
caused
by
Advertisement
Table of Contents
