Table of Contents
Advertisement
3.1. ALIGNMENT MARKS
Put the conductor within the jaws on intersection of the
indicated marks as much as possible (see Fig.2)in order
to meet the meter accuracy specifications.
1
2
3.2. USE OF RUBBER TEST LEADS HOLSTER
In standard accessories of instrument there is a rubber
holster that, inserted on clamp, can bring one of two test
leads, like showed in Fig.3
Fig1. Instrument Description
1) Alignment marks. 2)
Conductor.
Fig. 2:Alignment marks
EN-6
TM-1012
LEGEND:
Advertisement
Table of Contents
