Table of Contents
Advertisement
Wind blocker
Wind blocker (retailer installed accessory)
The wind blocker is intended for use while
driving with the power retractable hard top
down to help reduce swirling breezes in the
passenger compartment.
Installing the wind blocker
1. Unfold the wind blocker to its full width.
2. Unfold the supports on both rear sides.
3. Slide the winder blocker's rear sup-
ports under the rear head restraints so
that they rest on the upper edge of the
backrest.
4. Press the side lock tabs into the holes
in the side panels until they click into
place.
5. Raise the wind blocker.
The zipper in the wind blocker can be
opened to place or access objects in the rear
seat.
CAUTION
Slide in the supports carefully to avoid dam-
aging the upholstery.
WARNING
• Make sure the wind blocker is securely
attached. An improperly secured wind
blocker may cause injury to occupants of
the vehicle or to other motorists.
• No one should be allowed to sit in the
rear seat when the wind blocker is in place.
When not in use, the wind blocker should be
stored in its bag, in the trunk, against the rear
seat backrest.
04 Interior
Power retractable hard top
04
97
Advertisement
Table of Contents
