Troubleshooting - Insignia NS-BCDCAS1 User Manual

Listening to an external audio device
To listen to another audio device:
1 Make sure that the boombox is turned off.
2 Plug one end of the 3.5 mm AUX cable (not included) into the AUX
IN jack on the back of your boombox.
3 Plug the other end of the cable into the Line-out jack on the audio
device, such as an iPod or other MP3 player.
4 Press
5 Press
display.
6 Use the controls on the audio device to control playback.

Troubleshooting

Problem
Your boombox will not
turn on
CD player will not play
A CD skips while playing
CD Boombox with Cassette Player and AM/FM Radio
(Standby/ON) to turn on the boombox.
(source) one or more times until "Aud" appears on the
Caution
Do not try to repair the boombox yourself. Doing so will
invalidate your warranty.
Solution
• Unplug your boombox for a few moments, then plug
it back in.
• Make sure that the AC outlet is working by plugging
another device into it.
• Make sure that you have put a CD in the CD tray.
• Make sure that the CD is inserted label side up.
• Try a different CD.
• Make sure that the CD player is not paused.
• Make sure that the CD mode is selected.
• Make sure that you are using a compatible CD. Your
boombox can play standard and 3" audio CDs,
CD-R, and CD-RW.
• Wipe the CD with a cloth to clean it
• Try a different CD.
• Make sure that the CD is not warped, scratched, or
damaged.
• Make sure that your boombox is not being affected
by vibration or shock. Move the boombox if
necessary.
• Make sure that you are using a compatible CD. Your
boombox can play standard and 3" audio CDs,
CD-R, and CD-RW.
www.insigniaproducts.com 15