Internal Speaker Failure - Acer Aspire 5560 Service Manual

Internal Speaker Failure

If internal Speakers fail, perform the following, one at a time. Do not replace a non-defective
FRU:
Figure 4-6. Internal Speaker Failure
Sound Problems
Perform the following, one at a time.
1. Boot the computer.
2. Navigate to Start  Control Panel  System and Maintenance  System  Device
Manager. Check the Device Manager to determine that:
The device is properly installed

There are no red Xs or yellow exclamation marks

There are no device conflicts

No hardware is listed under Other Devices

3. If updated recently, roll back the audio driver to the previous version.
4. Remove and reinstall the audio driver.
5. Make sure that all volume controls are set mid range:
Click the volume icon on the task bar

Drag the slider to 50. Confirm that the volume is not muted.

Click Mixer to verify that other audio applications are set to 50 and not muted.

Troubleshooting
Start
Is speaker cable
well connected?
Is speaker
OK?
Replace M/B
OK
Reconnect the
NG
speaker cable
OK
Replace speaker
NG
0
0
4-11