Removing The Usb Board - Acer Aspire 5560 Service Manual

Removing the USB Board

1. Perform the "Removing the Palmrest Module/Upper
page 3-23.
2. Open the connector latches on both ends of the USB board cable (a) and then disconnect
the USB board cable from both the mainboard and the USB board (b). Remove the USB
board cable from the lower case (c).
Figure 3-42. USB Board Cable
3. Remove the screw securing the USB board.
Figure 3-43. USB Board Screw
Table 3-14. Screw
Step
USB Board Disassembly
32
Cover" procedure described on
Screw
M2 × L3
Quantity Screw Type
1
Machine Maintenance
0