Other Information; Specifications - Panasonic VL-VN1500 Installation And Operating Instructions Manual

Other information

Specifications

Door station (VL-VN1500)
Power source
Power
consumption
Dimensions
(mm) (height ´
width ´ depth)
Mass (weight)
Operating
environment
Installation
method
Image sensor
Viewing angle
Minimum
illuminance
required
Lighting method
IP rating
Card reader
(RFID)
Video format
Audio format
Network
interface
Network protocol TCP/IP, UDP
18
When using PoE: Class 2,
IEEE 802.3af
When using power supply
unit (VL-PS240): 24 V DC,
0.6 A
Standby: approx. 2.5 W for
PoE, 2.6 W for VL-PS240
During operation: approx.
5.1 W for PoE, 6.3 W for
VL-PS240
Approx. 141´100´28.5
(excluding protruding
sections)
Approx. 250 g
Ambient temperature:
approx. -10 °C to +55 °C
Relative humidity
(non-condensing): up to
90 %
Wall mount (mounting base
supplied)
1/3-inch CMOS sensor
(approx. 1.3M pixels)
Horizontally: approx. 113°
Vertically: approx. 69°
1 lx
(within approx. 50 cm from
the camera lens)
LED lights
*1
IP54
ISO/IEC 14443 Type A
®
(MIFARE )
(Frequency: 13.56 MHz; RF
transmission power:
42 dBµA/m (max.) @ 10 m)
H.264 codec
G.711 codec
Ethernet II (DIX)
Communication
mode
*1 Water resistance is only assured if the product
is installed correctly according to the
instructions, and appropriate water protection
measures are taken.
Power supply unit (VL-PS240, sold separately)
The power supply unit is for indoor use only.
Power source Input: 220-240 V AC, 0.2 A,
50/60 Hz
Output: 24 V DC, 0.6 A
Dimensions
Approx. 116´100´54
(mm) (height ´
(excluding protruding sections)
width ´ depth)
Mass (weight) Approx. 230 g
Operating Ambient temperature: approx.
environment 0 °C to +50 °C
Relative humidity
(non-condensing): up to 90 %
Installation Attach to DIN rail
method Wall mount (using included
screws)
Relay box (VL-RLY1, sold separately)
Power source Power supplied by the door
station
Dimensions
Approx. 92´78´38 (excluding
(mm) (height ´
protruding sections)
width ´ depth)
Mass (weight) Approx. 130 g
Operating Ambient temperature: approx.
environment 0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Installation Attach to DIN rail
method Wall mount (using included
screws)
Speed, Duplex AUTO
(10BASE-T/100BASE-TX,
FULL/HALF) (Auto
negotiation)