Canon iPF670 User Manual page 91

iPF670
1
In the application, create an original that takes up the entire space of the paper size.
•
If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on specifying the
margin, refer to the software documentation.
Note
2
Choose Print in the application menu.
3
Select the printer in the dialog box, and then display the printer driver dialog box. (See "Accessing the Printer
Driver Dialog Box from Applications .")
4
Make sure the Main sheet is displayed.
5
A
In the Media Type list, select the type of paper that is loaded. In this case, click Canon Glossy Photo Pa-
per 170gsm.
6
Select the print target in the
•
When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit
touches printing surfaces that are not dry yet, it may damage the paper or the edge of the document that is
Important
cut, depending on frequency of use. In this kind of situation, change the ink drying time using the following
procedure.
•
Click Advanced Settings in Media Type.
•
Select an ink drying time in the list for the Between Pages setting of Drying Time.
7
Click the Page Setup tab to display the Page Setup
sheet.
User's Guide
P.162
➔
E
Print Target list.
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)
91