Zoom Dialog Box - Canon iPF670 User Manual

Hide thumbs Also See for iPF670:

Table of Contents

Zoom Dialog Box

The following settings are available for orientation.

Roll Paper Length

Set the length of one page to print on roll paper.

When you place a checkmark on Auto Settings, the one-page length to be printed on roll paper is automatically

set so that the laid-out objects are printed on one page.

Available only if rolls are selected in Paper Source.

You can input between 203.2 and 18000.0(mm) (between 8.00 and 708.66(inch)).

You can change the numbers by clicking either ▲ button or ▼ button.

Set the object layout order.

The following settings are available for order.

Upper Left to Right

Upper Left to Bottom

When you have selected Roll Paper Length > Auto Settings and Paper Orientation > Vertical, you can choose

only Upper Left to Right.

When you have selected Roll Paper Length > Auto Settings and Paper Orientation > Horizontal, you can

choose only Upper Left to Bottom.

You can select the size of the print media.

You cannot display this if Roll Paper is selected in Paper Source.

This dialog box appears when you select Zoom from the View menu. You can enlarge or reduce the screen display.

Set the magnification for enlargement or reduction of the screen display.

You can input between 10 and 400.

You can change the numbers by clicking ▼ button.

Prints the image and text created with the application software in the orientation as it is.

Prints the image and text by rotating sideways 90 degrees from the orientation as specified in

the application.

The objects are laid out from upper left to right.

The objects are laid out from upper left to bottom.

User's Guide