iPF670
6
Open the Ink Tank Cover and install the ink tanks.
7
Load the Roll Media on the Roll Holder.
(See "Attaching the Roll Holder to Rolls.")
8
Load the Roll Media in the printer.
(See "Loading Rolls in the Printer.")
9
Install the software.
Note that the driver installation procedure varies depending on the type of connection.
•
When the printer is connected to a network (via TCP/IP), the printer's IP address may be changed if you
reinstall the printer.
Important
In this case, be sure to reconfigure the printer's IP address.
User's Guide
P.354
➔
P.357
➔
Reinstalling the Printer
573