Brother P-touch QL-710W Service Manual page 70

(7) Pass the link lever through the hole of the upper cover, and then hang the hooks
on the under cover to set the upper cover onto the under cover.
(8) Secure the upper cover with the two screws A and the five screws B.
NOTE: The screws A are screw, bind M2.6x4. The screws B are taptite, bind B
M2.6x8.
Screws B
Hook
Under cover
Fig. 3.5-34 Reassembling the Upper Cover and the Under Cover (6)
Screws A
Screws B
Hook
III - 51
Upper cover
Upper cover
Hole
Link lever