Siemens SITRANS LG270 Operating Instructions Manual page 48

Additional adjustments
- Reset
Setup
Menu item
Block adjustment
Measurement loop name
Units
Probe length
Type of medium
Application
Medium, dielectric constant
Superimposed gas phase
Dielectric constant, upper medium (TS)
Tube inner diameter
Max. adjustment - Level
Max. adjustment - Level
Min. adjustment - Level
Min. adjustment - Level
Accept adjustment of the level measurement?
48
With a reset, certain parameter adjustments carried out by the user
are reset.
The following reset functions are available:
Delivery status: Restoring the parameter settings at the time of ship-
ment from the factory incl. the order-specific settings. A created false
signal suppression, user-programmable linearization curve as well as
the measured value memory will be deleted.
Basic settings: Resetting the parameter settings incl. special param-
eters to the default values of the respective instrument. Any stored
false signal suppression, user programmable linearization curve as
well as the measured value memory is deleted.
The following table shows the default values of the instrument. De-
pending on the instrument version or application, all menu items may
not be available or some may be differently assigned:
Default value
Released
Sensor
Distance unit: mm
Temperature unit: °C
Length of the probe Ex factory
Liquid
Level, vessel
Water-based, > 10
Yes
1.5
200 mm
100 %
Distance: 0.000 m(d) - note block-
ing distances
0 %
Distance: Probe length - take dead
band into account
Yes
SITRANS LG270 - Operating Instructions
Modified value
PBD-51041066