Selecting The Scan Type - Standard Horizon HX300 Owner's Manual

been selected to the scan channel.
4. Repeat step 3 for all desired channels to be programmed into scan mem-
ory.
5. To DELETE a channel from the scan memory, select the channel by
pressing the
pears from the display.
6. When you have completed programming scan memory, turn the trans-
ceiver off and on by press and holding the

6.9.2 SELECTING THE SCAN TYPE

1. Turn the transceiver off by press and holding the
2. Hold down the
er while still holding down the
3. " " will appear on the display, indicating the Menu
("Set") Mode has been activated.
4. Press the
the Menu item " SC ".
5. Press the
or " MS (Memory Scan)". The factory default is " PS
(Priority Scan)".
Priority Scan: Scans the Scan Memory Channel,
Memory Scan: Scans the Scan Memory and the Pre-
6. After completing your selection, turn the transceiver
off and on by press and holding the
P
riority
HX300
or key, then press the
key, and then turn on the transceiv-
key, repeatedly if necessary to select
or key to select " PS (Priority Scan)"
Preset Channel, and the Priority
Channel (Channel 16).
set Channel.
S
can
FCC ID: K6630493X20 / IC: 511B-303493X20
key. The " " icon disap-
key.
key.
key.
M
eMory
key.
S
can
Page 25
Vertex Standard Co.,Ltd.