2-15. Lens Assy Removal
2-16. Prism Block and Polarizer Removal
• Remove the C Board (Refer to 2-9.).
1 Four screws
(+P3 x 5)
2 Cover
8 Screw
(+PSW3 x 8)
9 Rch-in polarizer
2-8
2 Lens assy
5 Rch-out polarizer
3 Screw
(+PSW3 x 8)
Flexible cable
1 Four screws
(+PSW4 x 12)
6 Gch-out polarizer
7 Bch-out polarizer
!/ Screw
(+PSW3 x 8)
!- Gch-in polarizer
4 Prism block
Note:
Use extreme care not to touch the
glass section of prism,LCD,and
conductive section of the flexible
cable in particular.
!= Screw
(+PSW3 x 8)
![ Bch-in polarizer
VPL-PX20/PX30