Sony TAV-L1 Service Manual page 12

TAV-L1
BELT REPLACING METHOD
Note: When the driving block joint section is lowered, rotate the A in the arrow direction
PROTECTION OF LCD
LCD
driving block
bracket (plate screw)
Note1: If the driving block joint section is moved up or down, it can swing in all directions.
When moving the driving block joint section up or down,
protect the LCD front surface with protective materials
such as a cardboard so as not to damage the LCD front surface.
Note2: Note when installing the driving block joint section
When installing the driving block joint section, beware of the bracket (plate screw) front surface.
12
so that the driving block joint section comes to the position higher than the sensor
(to the extent that the belt is removed).
belt
A
protective material
driving block
sensor