Electrical Adjustments - Sony TAV-L1 Service Manual

TAV-L1
1. ENTERING THE SERVICE MODE
Procedure:
1. Set the remote commander (RM-ANP003) to the MONITOR
mode.
2. Press the [POWER] button to turn off sleep mode.
3. Press the [POWER] button to set the standby mode.
4. Press the following buttons on the remote commander within
a second of each other.
[DISPLAY] → [5] → [VOL +] → [POWER]
5. When service mode is activated, it is displayed as follows.
2. RESETTING THE USER MENU-FACTORY
RESET
The TEST RESET option resets all the customer adjustable data
back to factory defaults.
Note: These sets have a sleep mode. To turn the sleep mode off, turn the set
on and access service mode within two minutes.
Procedure:
1. Set the service mode.
2. Select the "SVC".
3. Set the "TEST RESET" to the "OK".
44
SECTION 6

ELECTRICAL ADJUSTMENTS

3.
Aging mode is designed to remove image retention from the screen.
Note: Once you enter into aging mode the remote commander no longer
Procedure:
AGING MODE
functions with the set. To turn off the set, press the [POWER] button
on the set.
1. Set the service mode.
2. Select the "SVC".
3. Set the "AGING MODE" to the "ON".