TEC SL-5900 Series Programming Manual page 67

EM3-31005
[P2-8] Print 13th digit under bar code, Automatic
and Label auto print condition
clear condition, Speed
key
redepresslon,
T
- Print 13th digit under bar code
0: Print
1: No print
- Automatic clear condition
D16
D15
UP4 UP3
Condition
0 0 When the net weight has changed 10d or mare
and then the scale has returned to the zera point.
0
1
When the state of net weight 2 10d is stable, end
then the scale has returned to the zero point.
1 0 When the state of net weight 2 10d is stable, the
returned to the zero paint.
Any combination of bii other then the above is prohibited.
Speed
key re-depression Available/Not available
0: Available
1: Not available
L
Label auto print condition
~
Any combination of bits other then the abave is prohibited.
By count label printing
NOTE:
The value with
asterisk(
* ) cannot be changed after RAM Clear.
- 64 -