Table of Contents
Advertisement
EM3-31005
NOTES:
1.
1 to 9999 can be set for the TabW.
(Except US, CA, MX, CL type)
2. Set
the PLtJ#
and
press the 1 ENTER Ikey, then set the Table# in the PLU file.
(Except US, CA, MX, CL type)
3.
To set the TabW
in plural number of PLUS, press the (RETURN 1 key to enter the
Table# in the next PLU.
(Except US, CA, MX, CL type)
4.
Ingredient
data cannot be saved into CMT, PL-3 and RAM card for the SL66..
5.
This setting function can be used only after designating
the PLU# by initial set 9-6, 7
and 8, and selecting RAM capacity by initial set 14-4 and 5 to secure a memory space.
Data may be damaged
if the initial set is changed during ingredient
setting.
Initial Set 9
Initial Set 14
5
4
RAM Capacity
0
0
PLU 1240/lng. 0
6.
Ingredient
file cannot be transferred
in the FUN system.
(Except US, CA, MX, CL type)
7.
When no data is programmed
for the PLU, ingredient
cannot be set.
8.
"PLU NOT FOUND"
error occurs when PLU# not registered is entered.
9.
The ingredient
to be used for SEND or RECENE is cleared when entering this mode.
10.
"MEMORY
FULL" error occurs when there is no memory space to register ingredient
data.
11.
To set the Table# of ingredient only, press them
key without setting the PLU#.
(Except US, CA, MX, CL type)
DELETE
12.
When the Table# is deleted by pressing the El PLU
key, the Table# in the PLU file is
not deleted.
(Except US, CA, MX, CL type)
DELETE
13.
To delete the T
I
in he PLU file, call the PLU# and press the
l/2
A
By pressing the
rzl
I
key.
DELETE
key, the Table# in all PLU files is deleted.
B
(Except US, CA, MX, CL type)
14.
Plural PLUS cannot use same ingredient data.
(PLU and ingredient data are in pairs.)
(for US, CA, MX, CL type)
15.
Any terminal in FUN System can transfer PLU and its ingredient
data
in pairs to other
terminals.
(for US, CA, MX, CL type)
- 28 -
Advertisement
Table of Contents
