Initial Set Mode [P3] - TEC SL-5900 Series Programming Manual

9.5 Initial Set Mode [P3]
This mode allows the operator to check the
key
status corresponding to the key on operation
keyboard.
Depress the initial switch.
Depress the DATE & TIME
key
three
times.
Check the key status. (Refer to table 3)
Depress the initial switch.
n Table 3 : Key Status Table
8PO- 1
P3-
1
Key status of the DT/TM
key.
89 8A 8b
NOTE: The FEED key has no key status.
- 52 -