Fault Table - Bosch SM SERIES Instruction Manual

en Fault, what to do?

Fault table

Fault
"Check water supply"
display lights up.
Fault code ":‹ˆ is lit.
Fault code ":‚ƒ is lit.
Fault code ":‚... is lit.
Fault code ":‚† is lit.
Fault code ":‚‡ is lit.
Fault code ":ƒƒ is lit.
*Depending on the features of your dishwasher
36
Reason
Supply hose kinked.
Water supply turned off.
Water supply jammed or
calcified.
Filter in the water supply blocked. Switch off the appliance and pull out the
Intake opening (on right inside of
appliance) covered by utensils.
Heating element calcified or
soiled.
Water protection system
activated.
Constant water supply.
Filters 1Z are soiled or
blocked.
Remedial action
Install supply hose without kinks.
Turn on water supply.
Turn on water supply.
Flow rate must be at least 10 l/min. when
water supply is open.
mains plug. Turn off water supply.
Unscrew water connection.
Clean filter in the supply hose. Screw
water connection on again. Check for
leaks. Reconnect power supply. Switch on
the appliance.
Arrange utensils so that the intake
opening is not obstructed.
Clean appliance with dishwasher cleaning
agent or descaler. Operate the dishwasher
with water softening system and check the
setting.~ " Water softening
system/special salt" on page 14
Turn off water supply.
Call customer service and quote the fault
code.
Clean filters. ~ "Filters" on page 34