Service Mode - Panasonic HDC-HS300P Service Manual

6 Service Mode

1. Indication method of the service menu
Set the mode dial "Motion Picture Recording" mode.
2. While keep pressing the "Intelligent auto" button, "Manual focus" button and "Menu" button for more than 3 seconds until the
top screen of the Service Mode Menu being displayed.
Service mode menu
Screen display
1
2
3
4
5
6
NOTE:
Do not using service mode except above table of Service Menu.
3. End method of the top screen of the service menu
Push the menu button to end the service mode, and then POWER OFF.
Contents
Factory settings
Drive information display
HDD self check execution
Lock search history indication
Power ON self check result display
HDD hardware test
Function
Function to throw a product up in a factory shipment state
(When recorded data in HDD, "error display" is done)
Fall detection frequency of HDD, Frequency that exceeds high-
est/lowest operation guarantee temperature and serial number
display
Function to check self as for the state of HDD
Display an error cord for three histories saved in EEPROM
Power ON self check (function to diagnose correct function of
the device and interface between devices) result display
Function to confirm state of HDD hardware
23