HP E8400A C-Size VXI Mainframe User And Service Manual page 35

rubber door stop
Figure 2-12. Installing the Acrylic Door Hinges, Door Stops, and Latch Keeper.
Chapter 2
m3x8 pan head screws
door latch
4. Slide the mainframe into the rack until the rack mount adapters
contact the rack's vertical rails.Start the dress screws but do not
tighten.
5. Install the door assembly by placing the hinges over the hinge pins on
the right adapter. Adjust the door for squareness and clearance by
holding the door in place while tightening the dress screws.
6. Adjust the latch keeper so that the door latches as it makes contact
with the rubber door stops.
m5x10 flat head screws
hinge pins
Rack Mounting and Option Installation 35