HP E8400A C-Size VXI Mainframe User And Service Manual page 24

rack mount
adapters
24 Rack Mounting and Option Installation
2. Using the rack mount adapters as templates, position the adapters on
the rack's vertical rails where the mainframe is to be mounted. Align
the adapter holes over the "center" holes of the EIA rack units (Figure
2-2).
Note
If you are using the HP E8400A VXIplug&play Compliant adapter kit,
position the adapters such that all three mounting holes are directly over
holes on the rack's vertical rails, and that the adapter flanges cover nine full
EIA rack units with no overlap.
3. Slide channel nuts over the rack holes to be used by the rack mount
adapters.
Figure 2-2. Positioning the Mainframe in the Rack.
EIA rack unit
center holes
EIA rack unit
center holes
rack unit
center hole
one
rack
unit
Chapter 2