Input Filters; Setup Screen - Omicron Lab CP AL1 User Manual

2.3 Input Filters

Figure 2-10:
Input filter menu
In the RMS/THD measurement mode, filters are available on the input filter menu. For
the filter characteristics and applications, see Table 3-2: "Input filters" on page 27.

2.4 Setup Screen

Figure 2-11:
Setup screen
The setup screen allows customizing the CP AL1 basic settings. To customize
the settings:
1. Select the setup screen menu (SET) on the menu bar.
2. Move the cursor to the entry field corresponding to the setting you want to
3. Select the required value by using the arrow keys.
4. Press the ENTER key.
The setup screen opens.
change, and then press the ENTER key.
Operation
19