Temperature set-point
Programs
1
The sound feedback is effective only when the energy probe is connected, after installing the optional interface.
10. Alarms
The system is able to generate and report alarm conditions related to monitoring the consumption of elec-
tricity.
For a description of the notifications, see respectively paragraph 8.10.2.
11. Cleaning the device
The device, featuring a display with capacitive buttons, requires you to be gentle during the cleaning phase.
Avoid using aggressive products. Clean the display with a special cloth for cleaning lenses.
12. Installation rules
Installation should be carried out in compliance with the current regulations regarding the installation of
electrical systems in the country where the products are installed.
13. Regulatory compliance
LV directive.
EMC directive.
Standards EN 60730-2-7, EN 60730-2-9.
T
(Away-Heat.)
0
T
(Economy-Heat.)
1
T
(Comfort-Heat.)
2
T
(Away-Aircon.)
0
T
(Economy-Aircon.)
1
T
(Comfort-Aircon.)
2
T
(Manual-Heat.)
M
T
(Manual-Aircon.)
M
T
(Antifreeze)
G
Heating Prog.
Air Con. Prog.
[T
, 10..35]°C
0.1°C
G
[10,..,35]°C
0.1°C
[10,..,35]°C
0.1°C
[10,..,35,OFF]°C
0.1°C
[10,..,35]°C
0.1°C
[10,..,35]°C
0.1°C
[10,..,35]°C
0.1°C
[10,..,35]°C
0.1°C
[4,..,10]°C
0.1°C
[T
,T
,T
]
0
1
2
(Heating) for
each interval
-
of time
(24hx2x7d)
[T
,T
,T
] (Air-
0
1
2
con.) for each
interval
-
of time
(24hx2x7d)
15°C
18°C
20°C
28°C
26°C
23°C
18°C
26°C
5°C
-
-
35